Description
Electric Water Heater
Operates with electric energy, where the resistance inside the water heater is heated, thus warming the water.
It connects to the water supply, and for every amount of hot water drawn for use, there is automatic replenishment with cold water.
Capacity
Based on the capacity in liters, it can meet the needs of one person, for example, shower use and dishwashing. The water heats up very quickly, within about 30-45 minutes.
Tank
The water storage tank features an internal enamel coating, which results from the application of enamel (glass) onto metal. This protects it from rust, as the water does not come into contact with the walls, thus ensuring always clean water.
Installation
The water heater can be installed vertically on a wall. Vertical installation provides easier maintenance, but care is needed when installing the base on the wall.
Features:
Inner tank made of steel sheet enamelled with titanium enamel baked at ~830°C according to the German standard DIN 4735
Outer casing made of electrostatically painted steel sheet
Polyurethane insulation with density >50kg/m3 without CFC
Cathodic protection with Magnesium anode (Periodic Replacement)
Electric resistance on a flange with a diameter of 120mm with eight (8) holes
Adjustable thermostat with double safety circuit
Temperature indicator instrument
Operation indicator light
Safety & Return Valve
Water Heater VS Electric Boiler
The water heater operates with electric energy, where the resistance inside the water heater is heated and thus the water is warmed.
On the other hand, the electric boiler, in addition to heating the water through electric energy, has an internal exchanger (coil) with the ability to connect to the central heating system, to assist in the production of hot water. This reduces the use of electric energy.
This means that once connected, the hot water produced by, for example, the oil boiler, heats not only the radiators but also the water in the water heater, thereby promoting cost savings during the winter months.
Manufacturer
Bartec - Electric Water Heaters Bartec
Specifications
Type:Water Heater
Nominal Capacity:20 lt
Placement:Vertical
Power:2kW
Material:Glass
Dimensions
Height:36 cm
Width:44 cm
Depth:44 cm
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it.
